Tudor Antique DeANERY

A hand crafted natural Limestone paving, recreating the appeal of time-worn flagstones from previous centuries.

Tudor Antique Deanery paving features rounded corners and a smoother riven relief to the face, created to blend sympathetically with older properties and gardens where the design seeks to provide an established feel.

Tudor Antique paving can also be used, to great effect, as indoor flooring and can create a wonderful warm radiator of heat when combined with an under-floor heating system.

Hand cut edges and a tumbled aged appearance.
 

Coverage

Contractor Pack (Crate)

900mm x 600mm (13 pavers)

600mm x 600mm (13 pavers)

600mm x 290mm (13 pavers)

290mm x 290mm (9 pavers)

48 paving tiles per pack
 

48 pieces (Pack) cover approximately 15.00m2 based on a typical jointing gap of 10-14mm.

Calibrated 20mm

 

Laying Comments

 

For best results and to reduce possible salt staining from the base mortar on the face, we recommend that a Primer Slurry should be applied to the underside of the paving at the time of laying to improve the bond of the stone to the base mortar, which will increase the longevity of your patio.

 

Use a traditional sand cement pointing mortar to joint or Pavestone Pointfix Jointing Compound for a faster finish.

Tudor Antiqued Paving should be laid with the chamfered edge face down.

Before committing to purchase any natural stone product it is always recommended that you visit your stockist to check the colour and texture of your chosen paving.

Each of the colour swatches reproduced in this brochure demonstrate the overall hue of a paved area. The natural colour variation of individual paving flags will vary when viewed individually.

 

For more information click here.