Porcelain Steps
Porcelain Steps
Our standard porcelain step is 20mm deep and can be bullnosed or square on the leading edged. We recommend a 'Weather Strip' is Incorporated on the underside to prevent staining of the risers and dampness setting in to the under joints.
Porcelain steps and risers are supplied trough our Pavestone Bespoke service they can have bullnose or half bullnose edges and be pre-cut to your dimensions if. Please email: sales@pavestone.co.uk or call 01386 848650 and ask for "Bespoke" for more details.
Grey, Anthracite & Dust (1000 x 160 x 20mm)
Specification
Size | Made to order |
Tolerance | +/- 1mm |
Finish | Stone effect; Textured |
Edge Profile | Square or Bullnose edge available |
Slip Resistance | >R11 |
Frost Resistant | Yes |
Water Absorption | <0.01% |
Key features of Porcelain
- R11Anti-slip Finish.
- Porcelain paving tiles will not be affected by the seasonal weather changes and will not deteriorate in freezing weather conditions that can see some stone surfaces deteriorate gradually.
- Porcelain paving tiles are resistant to acid and alkali chemicals such as fertilizers and lawn treatments. Moss and algae cannot get established as they can on stone.
- Porcelain paving tiles will not experience colour fading. Blacks will stay black, not turn to grey, light colours will stay faithful and will not turn grey/brown. In summary they will stay looking aesthetically as laid for many years with minimal cleaning maintenance.
R11 Anti-slip Finish is the latest development to meet the growing demand for porcelain outdoor paving. This unique finish roughens the tile surface without changing its appearance giving good grip underfoot in damp and wet weather.
Laying Instructions
Download Laying Instructions
Laying Comments
Porcelain Steps are rectified to give a calibrated, dimensional accuracy. This enables closer jointing so that the tiles can appear as one large uninterrupted, seamless surface of stone flooring.
A rectified floor tile is one whose edges are perfectly vertical with respect to it's surface. This is a result of precise machining of a regular unrectified tile, so that each of the four sides will be at a 90° angle to the top and bottom faces of the tile.
Lay on an MOT Type 1 or GSB aggregate sub-base, over a geo-textile covering.
Set the paving tiles on a full wet mortar bed (40mm), using a 5:1 sharp sand : cement ratio.
Cut tiles with a 'Diamond Porcelaing Cutting Blade' (circular no teeth) on a hand tool or table saw. Use 'water dust suppression'.
It is essential to use a Priming Slurry, which should be applied to the underside of each paving tile just prior to laying.
Joint width ideally 5mm (optimum cosmetically).
Porcelain is manufactured in batches and the the colour and texture can vary from batch to batch. It is therefore essential to lay the paving by mixing the tiles from each of the packs that are to be laid. This ensures that the overall desired hue is achieved and evens out any slight colour discrepancies. Laying your patio one pallet at a time can lead to slight but visible colour banding.
Keep a note of the 'batch code' of the porcelain being laid in case you need more to complete or extend your paved area. This can be found on the packaging (usually a number followed by a letter, or a six digit number.
A flexible jointing grout should be used to joint the tiles and care must be taken not to let it dry on the surface of the tile.
Please refer to our laying instructions if in any doubt.
Keep your paving looking superb, year after year!
A range of scientifically advanced cleaning products that will clean and help maintain all types of natural stone, concrete and porcelain paving.
PATIO CLEANER
Suitable for sandstone, limestone, travertine, slate, granite, marble, terracota, brick, concrete and porcelain patio paving. Available: 1ltr, 5ltr
|
|
Technical Data Sheet | Application Guide |
BLACK SPOT & ALGAE REMOVER
Suitable for sandstone, limestone, travertine, slate, granite, marble, terracota, brick, concrete and porcelain patio paving. Available: 5ltr
|
|
Technical Data Sheet | Application Guide |
DRIVEWAY CLEANER
Removes engine oil, air-con fluids, tyre marks and other vehicle stains and rubber deposits, in addition to removing vegitation staining from driveway concrete block paving and natural stone block paving. Available: 5ltr
|
|
Technical Data Sheet |
Contact Us
To find out more about Porcelain Steps, you can call us or email us.
01386 848 650 enquiries@pavestone.co.ukFind a Landscaper
To find your nearest preferred landscaper, please enter your postcode below.
Bespoke
Cutting & Profile
Introducing our new bespoke porcelain cutting and profiling service.
Find out more