Regal Pool Paving

Regal Summit  (750mm x 500mm x 20mm)
                                  (500mm x 500mm x 20mm)

Regal Oasis   (750mm x 500mm x 20mm)
                              (500mm x 500mm x 20mm)

About

Home swimming pools are becoming increasingly popular and Regal sandstone paving makes an ideal poolside paving. Regal paving can be close jointed like tiles and is calibrated at 20mm thickness.

The honed face of the Regal paving range produces a smooth luxurious finish that is particularly suitable for the creation of modern, contemporary pool areas.

Available in two coulours and two single size packs.

Coverage

Single Size Packs

750mm x 500mm x 20mm

45 paving tiles per pallet

Available as single paving tiles.

2.7 paving tiles covers approximately 1.0m²

45 paving tiles (1 pallet) covers approximately 16.9m²

500mm x 500mm x 20mm

45 paving tiles per pallet

Available as single paving tiles.

4 paving tiles covers approximately 1.0m²

45 paving tiles (1 pallet) covers approximately 11.3m²

Laying Comments

For best results and to reduce possible salt staining from the base mortar on the face, we recommend that a Slurry Primer should be applied to the underside of the paving at the time of laying. The base mortar should contain SBR Bond additive included within the mix. 

Regal paving should not be butt jointed. A small gap is required for expansion and contraction of the paving, ideally about 2-3mm. A flexible jointing grout can be used but care must be taken not to let it dry on the surface of the paving. Alternatively use a traditional sand cement pointing mortar.