Piazza Pool Paving

Home swimming pools are becoming increasingly popular and Piazza sandstone paving makes an ideal poolside paving with its textured anti-slip, smooth surface and quick drying properties. Piazza can be close jointed like tiles and is calibrated at 20mm thickness.

Piazza is a modern contemporary paving with sawn, straight, edges designed to create a fresh, clean looking pool.

The colours are as the Regal range of paving but Piazza has a lightly textured face that gives enhanced anti-slip qualities to the surface.

Available in two coulours and two single size packs.

Colours

Piazza Summit (C)

Piazza Oasis (C)

Specifications & Coverage

Coverage

Single Size Packs

750mm x 500mm x 20mm

45 paving tiles per pallet

Available as single paving tiles.

2.7 paving tiles covers approximately 1.0m²

45 paving tiles (1 pallet) covers approximately 16.9m²

500mm x 500mm x 20mm

45 paving tiles per pallet

Available as single paving tiles.

4 paving tiles covers approximately 1.0m²

45 paving tiles (1 pallet) covers approximately 11.3m²

Installation

Laying Instructions

Lay Piazza Sandstone tiles exactly as you would porcelain tiles, following the instructions below:

How to Lay A Porcelain Patio (Full Video)

Download Laying Instructions

Laying Comments

Lay on an MOT Type 1 or GSB aggregate sub-base, over a geo-textile covering.

Set the paving tiles on a full wet mortar bed (40mm), using a 5:1 sharp sand : cement ratio.

Cut tiles with a 'Diamond Porcelain Cutting Blade' (circular no teeth) on a hand tool or table saw. Use 'water dust suppression'.

It is essential to use a Priming Slurry, which should be applied to the underside of each paving tile just prior to laying.

Joint width ideally 5mm (optimum cosmetically).

Porcelain is manufactured in batches and the the colour and texture can vary from batch to batch. It is therefore essential to lay the paving by mixing the tiles from each of the packs that are to be laid. This ensures that the overall desired hue is achieved and evens out any slight colour discrepancies. Laying your patio one pallet at a time can lead to slight but visible colour banding.

Keep a note of the 'batch code' of the porcelain being laid in case you need more to complete or extend your paved area. This can be found on the packaging (usually a number followed by a letter, or a six digit number.

A flexible jointing grout should be used to joint the tiles and care must be taken not to let it dry on the surface of the tile.

Please refer to our laying instructions if in any doubt.

Maintenance

Keep your paving looking superb, year after year!

A range of scientifically advanced cleaning products that will clean and help maintain all types of natural stone, concrete and porcelain paving.

	PATIO CLEANER A heavy duty cleaner for removing stubborn ground in dirt and grime from patio and pathway paving. Suitable for sandstone, limestone, travertine, slate, granite, marble, terracotta, brick, concrete and porcelain patio paving. Available: 1ltr, 5ltr
Technical Data Sheet	Application Guide

	BLACK SPOT & ALGAE REMOVER Removes black spot, lichen, moss and stains from natural stone, concrete and porcelain patio and pathway paving. Suitable for sandstone, limestone, travertine, slate, granite, marble, terracotta, brick, concrete and porcelain patio paving. Available: 5ltr
Technical Data Sheet	Application Guide