Antico Pool Paving
Antico Pool Paving
Granite (Length 800mm: Width 400mm: Thickness 20mm)
Quartzite (Length 800mm: Width 400mm: Thickness 20mm)
All dimensions are nominal.
About
Unlike most porcelain paving, Antico has fettled edges, replicating hand-cut natural stone paving.
Available in two shades, this stylish single size paving is a good paving tile for either a traditional or contemporary garden.
Two bold stone colours and textures to choose from, the Antico porcelain paving range is inspired by traditional hand-cut natural stone paving. Whilst being almost indetectable from the natural stone product product it replicates, Antico porcelain will remain lookinging clean and 'just laid' for many years, without the scrubbing and cleaning associated with natural stone.
R11 Anti-slip Finish is the latest development to meet the growing demand for porcelain outdoor paving. This unique finish roughens the tile surface without changing its appearance giving good grip underfoot in damp and wet weather.
Key features of Antico:
- R11Anti-slip Finish.
- Fettled edges replicating a hand-chisled finish
- Antico porcelain paving will not be affected by the seasonal weather changes and will not deteriorate in freezing weather conditions that can see some stone surfaces deteriorate gradually.
- Porcelain Patio Tiles are resistant to acid and alkali chemicals such as fertilizers and lawn treatments. Moss and algae cannot get established as they can on stone.
- Antico porcelain paving will not experience colour fading. Blacks will stay black and not turn to grey, light colours will stay light colours and will not turn grey/brown. In summary they will stay looking aesthetically as laid for many years with minimal cleaning maintenance.
Coverage
Porcelain Stone Tiles
54 paving tiles per pallet.
Available as single paving tiles.
3.1 paving tiles covers approximately 1.0m2
54 paving tiles (1 pallet) covers approximately 17.4m2
Laying Comments
As with all paving, it is essential to lay the paving by mixing the tiles from each of the packs that are to be laid. This ensures that the overall desired hue is achieved and evens out any slight colour discrepancies. Laying your patio one pallet at a time can lead to slight but visible colour banding.
It is essential to use a Priming Slurry, which should be applied to the underside of each paving tile just prior to laying. Please refer to the laying instructions if in any doubt.
A flexible jointing grout should be used and care must be taken not to let it dry on the surface of the tile.
Each of the colour swatches reproduced above demonstrate the overall hue of a paved area. The natural colour variation of individual paving tile may vary significantly when viewed individually.
Laying Instructions
Download Laying Instructions
Laying Comments
Lay on an MOT Type 1 or GSB aggregate sub-base, over a geo-textile covering.
Set the paving tiles on a full wet mortar bed (40mm), using a 5:1 sharp sand : cement ratio.
Cut tiles with a 'Diamond Porcelain Cutting Blade' (circular no teeth) on a hand tool or table saw. Use 'water dust suppression'.
It is essential to use a Priming Slurry, which should be applied to the underside of each paving tile just prior to laying.
Joint width ideally 5mm (optimum cosmetically).
Porcelain is manufactured in batches and the the colour and texture can vary from batch to batch. It is therefore essential to lay the paving by mixing the tiles from each of the packs that are to be laid. This ensures that the overall desired hue is achieved and evens out any slight colour discrepancies. Laying your patio one pallet at a time can lead to slight but visible colour banding.
Keep a note of the 'batch code' of the porcelain being laid in case you need more to complete or extend your paved area. This can be found on the packaging (usually a number followed by a letter, or a six digit number.
A flexible jointing grout should be used to joint the tiles and care must be taken not to let it dry on the surface of the tile.
Please refer to our laying instructions if in any doubt.
Keep your paving looking superb, year after year!
A range of scientifically advanced cleaning products that will clean and help maintain all types of natural stone, concrete and porcelain paving.
PATIO CLEANER
Suitable for sandstone, limestone, travertine, slate, granite, marble, terracotta, brick, concrete and porcelain patio paving. Available: 1ltr, 5ltr
|
|
Technical Data Sheet | Application Guide |
BLACK SPOT & ALGAE REMOVER
Suitable for sandstone, limestone, travertine, slate, granite, marble, terracotta, brick, concrete and porcelain patio paving. Available: 5ltr
|
|
Technical Data Sheet | Application Guide |
DRIVEWAY CLEANER
Removes engine oil, air-con fluids, tyre marks and other vehicle stains and rubber deposits, in addition to removing vegetation staining from driveway concrete block paving and natural stone block paving. Available: 5ltr
|
|
Technical Data Sheet |
Contact Us
To find out more about Antico Pool Paving, you can call us or email us.
01386 848 650 enquiries@pavestone.co.ukFind a Landscaper
To find your nearest preferred landscaper, please enter your postcode below.
Bespoke
Cutting & Profile
Introducing our new bespoke porcelain cutting and profiling service.
Find out more