Coverage

Bullnose Step Tread

600mm x 400mm x 40mm

44 paving tiles per pallet

Available as single step treads.

Bullnose Step Tread Corners

400mm x 400mm x 40mm

44 paving tiles per pallet

Available as single step tread corner pieces.

Bullnose Step Tread Internal Corners

600mm x 600mm x 40mm

22 paving tiles per pallet

Available as single step tread internal corner pieces.

Bullnose Step Edging
 

600mm x 150mm x 30mm

100 edges per pallet

Available as single edging pieces.

Laying Comments

For best results and to reduce possible salt staining from the base mortar on the face, we recommend that a Slurry Primer should be applied to the underside of the paving at the time of laying.

Steps should not be butt jointed. A small gap is required for expansion and contraction of the paving, ideally about 2-3mm.

A flexible jointing grout can be used but care must be taken not to let it dry on the surface of the paving. Alternatively use a traditional sand cement pointing mortar.