Regal Summit (Garden One)

Regal Summit (Garden Two)

Regal Summit  (C)

Regal Oasis   (C)
 

Specification
 

Coverage

Contractor Packs

62 paving tiles (1 crate) cover approximately 15.75m²

Single Size Packs (750mm x 500mm x 20mm)

45 paving tiles per pallet

Available as single paving tiles.

2.7 paving tiles cover approximately 1.0m²

45 paving tiles (1 pallet) cover approximately 16.9m²

Laying Instructions

Download Laying Instructions 

Regal paving should be laid exactly as the porcelain tiles in the video / Instructions above.

General Laying Comments

Regal sandstone patio paving tiles are rectified to give a calibrated, dimensional accuracy. This enables closer jointing (5mm) so that the tiles can appear as one large uninterrupted, seamless surface of stone flooring.

A rectified floor tile is one whose edges are perfectly vertical with respect to it's surface. This is a result of precise machining of a regular unrectified tile, so that each of the four sides will be at a 90° angle to the top and bottom faces of the tile.

Lay on an MOT Type 1 or GSB aggregate sub-base, over a geo-textile covering.

Set the paving tiles on a full wet mortar bed (40mm), using a 5:1 sharp sand : cement ratio.

Cut tiles with a 'Stone Cutting Blade' on a hand tool  or table saw.  Use 'water dust suppression'.

It is essential to use a Priming Slurry, which should be applied to the underside of each paving tile just prior to laying.

Joint width ideally 5mm (optimum cosmetically).

It is always advisable to view your chosen paving prior to purchasing at your local stockist to fully appreciate the diversity of colours in each range. Piazza sandstone is split from seams of rock in batches and the the colour and texture can vary from batch to batch. It is therefore essential to lay the paving by mixing the tiles from each of the packs that are to be laid. This ensures that the overall desired hue is achieved and evens out any slight colour discrepancies. Laying your patio one pallet at a time can lead to slight but visible colour banding.

For best results and to reduce possible salt staining from the base mortar on the face, we recommend that a Priming Slurry should be applied to the underside of the paving at the time of laying.

Regal paving should not be butt jointed. A small gap is required for expansion and contraction of the paving, ideally about 6mm. A traditional sand cement pointing mortar or Pointfix Jointing Compound if the joint is to be +6mm.

Information on Regal Bullnose Steps & Edging

Keep your paving looking superb, year after year!

A range of scientifically advanced cleaning products that will clean and help maintain all types of natural stone, concrete and porcelain paving.

	PATIO CLEANER A heavy duty cleaner for removing stubborn ground in dirt and grime from patio and pathway paving. Suitable for sandstone, limestone, travertine, slate, granite, marble, terracotta, brick, concrete and porcelain patio paving. Available: 1ltr, 5ltr
Technical Data Sheet	Application Guide
	BLACK SPOT & ALGAE REMOVER Removes black spot, lichen, moss and stains from natural stone, concrete and porcelain patio and pathway paving. Suitable for sandstone, limestone, travertine, slate, granite, marble, terracotta, brick, concrete and porcelain patio paving. Available: 5ltr
Technical Data Sheet	Application Guide
	DRIVEWAY CLEANER   Removes engine oil, air-con fluids,  tyre marks and other vehicle stains and rubber deposits, in addition to removing vegetation staining from driveway concrete block paving and natural stone block paving. Available: 5ltr
Technical Data Sheet